Monday, October 19, 2009

My Latest 3-D Bell Design - Motif #3 (Round 2)

Motif #3 (Round 2)
3-D Bell (2009) - With 1872 Edging

This is the ‘project in white thread’ I mentioned in my recent Sept 17 post where I featured the antique 1872 edging in Lizbeth Caribbean (see Motif #1, 2nd round)

I knew the edging would be perfect (with a modification) for the ‘lip’ of a bell.

Then I had to design the rest of the bell, and I’ve worked on it for the past several weeks I’m very pleased with the results!

The bell measures 3-1/2” high, without the decoration, and 5” with the ribbon / bow
.






Photo of the bell in this special hanger, which I believe would look quite nice as a topper on a wedding cake! The hanger is 9” high. I can’t quite remember where I got it, though!

For more details about the tatting, see below.

I’m very happy about this bell, as it’s the first one I’ve created in 10 years! I use the term ‘create’ because the 'edges' I’ve used on the bells have been published patterns (usually vintage). My ‘creation’ is that of filling in the other areas with ring and chain combinations. The trick, of course, is to determine the sizes of the rings and chains, and to set up picot connections.






Here is the bell in its original state (not stiffened) with some fabric inside to better show the design.

I used #20 Cebelia, which I admit felt a little ‘rough’ after working with Lizbeth. Because it was going to be stiffened, I didn’t want to use my Lizbeth white thread; but then again, I’m not sure the ‘gauge’ would be the same.

I made a modification to the antique edge pattern, as I did not connect the small rings at the base of each ‘clover.






There are seven repeats of the edge pattern, and the rest of the bell is made to fit that number of repeats.
.
There are inconsistencies in this model, as I was trying various knot counts as I went along. Happily, I only had to re-do one section that wasn’t working out. Now I’ll have to tat another bell to test the pattern. (I sketched it out after the bell was completed. ) I also can see a 3-D egg shape forming here, so I hope to experiment with that idea, also!


Thanks to the 25-Motif Challenge, I’ve become motivated to more actively tat, and to think about making new things!

Experimenting with Lizbeth thread led to the search for an edging for a T-shirt., which then sparked this idea for the bell.

I’ll eventually show all my bells in my blog. However, I don’t have the ‘models’ for some of them - only photos – because I gave them as gifts. I did make sure to sketch out the patterns, but never remade them.

And even though I love the new color threads, I will always admire the classic white and ecru, as I have a particular fondness for Victorian items and vintage tatting. I especially enjoy decorating the items in 'Victorian' style – which represents a challenge in itself. Making bows and attaching them involves some patience!
I usually add a crystal ‘ball’ clapper on a metal chain, but I didn’t want to take the time to do that before posting. That involves wire cutters and pliers!

Before ‘signing off’ I want to mention the following:

First – I was a happy winner recently of Sherry’s “Mondo Monday” Giveaways! http://ladyshuttlemaker.blogspot.com/ I’m sure many of you are aware of Sherry’s generous nature and her creative spirit! I was DELIGHTED to receive one skein each of her hand-dyed threads Treebeard #20, and Rio, #80 !!! I have several ideas in mind, and can’t wait to tat with these gorgeous threads! (BTW, I just noticed the Bead Spinner for this week’s giveaway (Part V). I have one and they are REALLY COOL!) Check it out!!

Second – I had the great pleasure of being with Carol Lawecki ( http://caroltats.blogspot.com/ ) , her Mom (from our Beaver County Tatters group) and Carol’s good friend, Rayanna (a new tatter, taught by Carol), at a recent CAR CRUISE at Carol’s local high school which her children attend. This was their 5th annual cruise, and it’s a fund raiser for the high school band – a great idea! They get a huge number of cars (over 700!) , and we were delighted to go there in our GTO for the first time (about 1-1/2 hours away). I’ll be sharing some photos and more of the story in my next post!

I can’t believe it’s October already! The beautiful, bright colored leaves are helping to ease the realization that winter is not far behind. We at least haven’t had snow yet in our area, although temps are definitely below normal! Hoping to still have a touch of Indian summer!

7 comments:

  1. Beautiful bell! And I love the way you've displayed it. That's my biggest problem with bells - how to display. Hanging on the Xmas tree should not be the only way!

    ReplyDelete
  2. Hi Kathy, Your bell is absolutely gorgeous. I am so sorry I don't have time to read your whole post because I'm sure it's fabulous. These days I'm doing quick visits to mostly tatting blogs in the morning because that's all my busy schedule will allow!
    I sure hope you share the pattern for your beautiful bell someday!

    ReplyDelete
  3. Hi Kathy:
    Glad you had fun at the Car Cruise. I enjoyed our time together.
    Rayanna

    http://rayanna-luvz-tat-cropping.blogspot.com/

    ReplyDelete
  4. Hello Kathy,
    I fell in love with your bell as soon as I saw it...you have done a wonderful job on this...now I want to try one
    Happy Tatting
    Joy in OZ

    ReplyDelete
  5. Hi Kathy, Your tatted bell is BEAUTIFUL!! The bell is very nicely displayed also.

    I'm so glad you were able to attend the car cruise that our Kiski Area Marching Band put on in October. Also that you brought your tatting. Rayanna was very happy to tat and chat with you also.

    ReplyDelete
  6. Such a beautiful bell! Your work is inspirational.

    And I just have to stand up and say, "I'm jealous!" You get to spend time with Carol and her posse at a Car Cruise. *sigh* Well, I just have to get a grip, since I can't be everywhere at once. LOL!

    How great is it that so many tatters live so close to each other? For so long we tatters felt like a solitary breed. Such interesting times we live in.

    ReplyDelete